Ventilation cable gland
DAK 284 | IP66 / IP67

  • Cable gland with integrated ventilation
  • High degree of protection
  • Easy to install
  • Integrated strain relief
  • Waterproof filter
  • Large clamping range

Pressure differentials in enclosures with a high degree of protection are a result of internal and external temperature changes. In the case of negative pressure or partial vacuum, dust and humidity can enter the enclosure through the door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape the enclosure. The innovative and easy-to-install ventilation cable gland DAK 284 enables secure cable entry into an enclosure with simultaneous pressure compensation (protection type IP66 / IP67). Even with a slight overpressure, a waterproof filter inside the gland allows the humidity to escape whilst blocking water and dirt from entering the enclosure. 

Technical details

Download PDF

Mountingthread M12 x 1.5 / M16 x 1.5 / M20 x 1.5
Enclosure wall thickness0.5 - 3mm with lock nut
Materialplastic, light grey
Protection typeIP66 / IP67 (EN 60529)
Sealingsealing gasket NBR
FilterPTFE
Fitting positionvariable
Operating/Storage temperature-20 to +80°C (-4 to +176°F)
ApprovalsVDE, UL File No. E471430, EAC

To top

Installation:
Make cut-out in enclosure wall and mount ventilation cable gland with lock nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure and the hole is free of burns.

To top

Art. No.ThreadDiameterClamping range DSpanner sizes [mm] TorqueAir permeability1Weight
Size M [mm]
Length L
SW 1
SW 2
Lock nut
Cap nut
28410.0-00M12 x 1.58mm12.3mm4 - 8mm19182Nm2Nm25l/h7g
28411.0-00M16 x 1.510mm16.3mm4 - 8mm19222Nm2Nm25l/h8g
28412.0-00M20 x 1.510mm20.3mm6 - 12mm24265Nm5Nm40l/h13g

To top

1 at a pressure differential of 70mbar

Technical drawing

Ventilation cable gland DAK 284

To top