High-performance Fan Heater (Semiconductor)
CS 032 / CSF 032 | 1,000W

  • Compact and slim design
  • High heating performance
  • Double insulated
  • With or without thermostat
  • Quick connection

The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides double insulation and acts as protection against contact. Two screw connectors at the front of CS 032 allow comfortable wiring of an external thermostat. The CSF 032 is equipped with a pre-set thermostat. Both models were designed for wall fixing. A fan heater for fixing on the bottom of the enclosure is available on request.

Heating elementPTC resistor - temperature limiting
Surface temperaturemax. +80°C (+176°F), except upper protective grille
at +20°C (+68°F) ambient temperature
Temperature safety cut-outto protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearingair flow 63m³/h, free flow
service life 70,000h at +25°C (+77°F)
Connectionmale power insert connector according to IEC320 C18
Casingplastic according to UL94 V-0, black
Mountingclip for 35mm DIN rail, EN 60715 or
screw fixing (M5), tightening torque 2Nm max.
Fitting positionairflow direction up
Dimensions152.5 x 88 x 66mm
Weightapprox. 0.5kg
Operation/Storage temperature-40 to +60°C (-40 to +140°F) / -40 to +70°C (-40 to +158°F)
Operation/Storage humiditymax. 90% RH (non-condensing)
Protection type/Protection classIP20 / II (double insulated)
ApprovalsVDE, UL File No. E234324, EAC

Important note: Connectors and cables for electrical connection are not included in the delivery. Connection cables can be ordered separately, see Accessories.

To top

Fan heater CS 032 (without thermostat)

Art. No. Clip fixingArt. No. Screw fixingOperating voltageHeating capacity¹Inrush current max.
03209.0-0003209.0-01220-240VAC, 50/60Hz1,000W12.0A
03209.9-0003209.9-01100-120VAC, 50/60Hz1,000W18.0A

To top

Fan heater CSF 032 (with thermostat)

Art. No. Clip fixingArt. No. Screw fixingOperating voltageHeating capacity¹Inrush current max.Switch-off temperature²Switch-on temperature²
03201.0-0003201.0-01220-240VAC, 50/60Hz1,000W12.0A+25°C (+77°F)+15°C (+59°F)
03202.0-0003202.0-01220-240VAC, 50/60Hz1,000W12.0A+15°C (+59°F)+5°C (+41°F)
03201.9-0003201.9-01100-120VAC, 50/60Hz1,000W18.0A+25°C (+77°F)+15°C (+59°F)
03202.9-0003202.9-01100-120VAC, 50/60Hz1,000W18.0A+15°C (+59°F)+5°C (+41°F)

¹ at +25°C (+77°F) ambient temperature; ² tolerance ±5K
Note: Other switch-off and switch-on temperatures on request.

To top

Accessories

Connection cable with female power insert connector according IEC320 C17

Art. No.Length (L)
2443791.0m
2443802.0m

To top

Retaining Clip

Art. No.Note
237009Suitable for female power insert connector on connection cable 244379 and 244380

To top

Technical drawing

Fan heater CS 032
Fan heater CSF 032

To top