- High DC switching capacity
- Variety of applications
- Wide DC voltage range
- Simple connection
The switch module is used to control DC powered devices with high capacities in control and switch cabinets. It is controlled via an external potential-free contact (thermostat or hygrostat), which is connected between terminal 3 and 4. It must be ensured that the external contact is suitable to switch the required signal current without any problems.
| Contact type | contact maker normally open (MOSFET) |
|---|---|
| Service life | > 100,000 cycles |
| Operating voltage | DC 20 to 56 V |
| Control contact – signal current | 3 mA at DC 20 V / 4.5 mA at DC 24 V 14 mA at DC 48 V / 17 mA at DC 56 V |
| Connection | 6-pole terminal: stranded wire1 1.5 mm² (AWG 16); max. 2.5 mm² (AWG 12) |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Casing | plastic according to UL94 V-0, grey (bicolor) |
| Dimensions | 93 x 53 x 44 mm |
| Weight | approx. 65 g |
| Fitting position | vertical |
| Operating temperature | see article table below |
| Storage temperature | -40 to +80 °C (-40 to +176 °F) |
| Operating/Storage humidity | max. 90 % RH (non-condensing) |
| Protection type | IP20 |
| Approvals | UL File No. E342261, VDE, EAC |
| Note | other versions on request |
1 When connecting with stranded wires, wire end ferrules must be used.
| Art. No. | Max. switching capacity | Operating temperature |
|---|---|---|
| 01010.0-00 | DC 15 A | -40 °C to +40 °C (-40 °F to +104 °F) |
| 01010.0-10 | DC 13 A | -40 °C to +50 °C (-40 °F to +122 °F) |
| 01010.0-20 | DC 11 A | -40 °C to +60 °C (-40 °F to +140 °F) |
Technical Drawing
- www.stego.ru>
- Products>
- Regulating>
- Regulators>
- DCM 010 | Switch Module (DC 20V to 56V)
